HID P2000 Dual - Door Networked Access Control Controller

• Customization: Available
• Card Reader Quantity: 2
• Control Gates: Two Gates
• Model NO.: P2000
• Technology: 32-Bit Technology
• Way of Control: Computer Control
• Communication Mode: TCP/IP
• Type: One-way Controller
• Operating Humidity: 10% - 90% ( Non-Condensing )
• Backup Battery Interface ( Optional ): 12VDC / 7ah
• Input Interface (Ttl): 2 X Request to Exit (Rex) 2 X Door State Monitor
• Card Storage Capacity (Max): 2 X 10000
• Offline Storage Information (Max): 2 X 25000
• Transport Package: Paper Box Packaging
• Specification: 190mm*128mm*20mm
• Trademark: HID
• Origin: China
• HS Code: 8537109021
• Production Capacity: 50000pieces/Year
• Package Size: 29.00cm * 23.00cm * 4.00cm
• Package Gross Weight: 0.300kg

Product Description

Networked controller for dual doors

The P2000 dual - door access controller is a TCP/IP network access controller launched by HID Global, which is applied to large - scale real - time access management systems. It has powerful and stable functions. It uses Flash memory chips, which support local storage of a large amount of cardholder data and offline information; it has an embedded Linux operating system, solid - state storage, and strong real - time performance.

Product Features

HID Global's networked access control solution provides an open - architecture development platform, enabling HID software partners to deploy a wide range of multi - functional access control systems to protect customers' hardware investments. As a member of the HID Global networked access control solution series, P2000 adopts an industrial - control - class 32 - bit ARM microprocessor, featuring low power consumption, high speed, stability, reliability, and powerful functions. It has a low installation cost and can support data storage for up to 40,000 cards, meeting the current and future expansion needs of customers. P2000's input and output interfaces all adopt advanced protection circuits, with the capabilities of resisting lightning strikes, short - circuit protection, and strong anti - interference ability. P2000 supports two card readers or dual doors, facilitating customers to configure according to the application environment.

Specification

Model	P2000
Operating Voltage	12 - 16VDC
Power Consumption	200 - 250mA
Indicator Lights	3xLEDs
Card Storage (Max)	2X20000
Offline Storage Information (Max)	2X50000
Communication Interface	1X TCP/IP, 1XRS - 485
Reader Interface	2x Wiegand 26/34
Input Interface (TTL)	2x Door Release Button 2x Door Contact 1X Tamper Alarm
Output Interface (Relay)	2X Auxiliary 2x Door Open 2x Alarm
Backup Battery Interface (Optional)	12VDC/7AH
Anti - Electrostatic Interference	15KV
Operating Temperature	-10℃ - +55℃
Operating Humidity	10% - 90% (non - condensing)
Controller Dimensions	195mm×147mm×19mm

Installation and Debugging

Installation Specifications

Pipeline laying can be carried out in a cross or parallel manner according to the progress of decoration, but the following points should be noted:
The power line and signal line should be separately threaded through pipes, and when the two pipes are arranged in parallel for a long distance, they should be at least 30cm apart (note: when laying pipelines, metal pipes are uniformly required to be used);
The AC 220V power supply is uniformly supplied to each access control point by the management center UPS. In some cases, the AC 220V power supply for small systems can also be obtained nearby, but it should comply with relevant regulations;
When threading, it is necessary to make proper markings, and the joints of the wires must be placed in the junction box. If this aspect of work is neglected, it will bring great trouble to future installation and debugging work;
An 8-core shielded wire with a wire diameter greater than 0.5mm2 is used between the card reader and the controller. The model is RVVP8 * 0.5mm2 (8 × 16/0.2);
The TCP/IP controller and switch are connected using Category 5 or Category 6 cables, with models of UTP-cat.5 or cat.6 (note: during construction, information points must be reserved at the controller installation site for network access);
A 2-core power cord with a diameter greater than 0.5mm2 is used between the exit button and the controller. The model is RVVP2 * 0.5mm2 (2 × 16/0.2);
Installation requirements: The controller is generally installed in the weak current well or nearby above the ceiling of the corresponding door room, 30cm away from the ceiling. Translation: