| Customization: | Available |
|---|---|
| Type: | ID Card Reader |
| Card Type: | CPU, Mifare |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Card Type | CARD | Password Input | Bluetooth | APP | |
Standard | IC /Mifare one | Mifare S50 | Mifare S70 | ||
Optional | ID | T5577 | NFC | CPU Content | 2.4G |
Output Type | WG26 | WG34 | TTL | RS485 | |
Working frequency | 13.56M Hz | ||||
Reading Range | 20~70 mm Related to the card quality and installation environment | ||||
Working Voltage | DC 6V~26V | ||||
Working Current | Static Current <50mA Working Current<100mA | ||||
Reaction Speed | <50 ms | ||||
Encryption | Mann code modulation | ||||
Distance | Small than 100M Communication Distance | ||||
Reactance | ±6kV Contact discharge,±8kV Air discharge | ||||
LED Backlight Color | Blue / White / Custom | ||||
Glass Color | Black / Blue / Arctic White / Custom | ||||
Shell Color | Pearl Nickel / Pearl Chromium / Rose Gold / Custom | ||||
Work Instructions | Buzzer, Light | ||||
Work Environment | Temperature:-40℃~85℃ Humidity:5~90% | ||||
Shell Material | Plating alloy | ||||
Quality of the Product | 150 g | ||||
Appearance Of Size | L86mm × W86mm × H6.9mm | ||||
Installation without 86 - type back box | Ensure that the components on the back of the product do not touch the wall or metal. | |||
Installation with 86 - type back box | 1. The pre - embedded back box must be a national standard 86 - type back box, with a depth of 50mm or more than 60mm. 2. Do not overtighten the screws between the back box and the shell to avoid deformation of the metal frame. | |||
Installation on wood - grain surface | Holes can be directly drilled on the wood - grain surface, and the product can be directly fixed on the wood - grain surface with the auxiliary installation screws in the accessory kit. Hole size: 68 x 68 mm, depth 50mm or more than 60mm. | |||
Installation Precautions | 1. The screws fixing the panel below the frame of the glass panel must be tightened to prevent the glass from shaking. 2. Do not tear off the product protective film before the product is officially put into use. 3. If installed on a metal surface, it may shield RFID, resulting in reduced sensing distance or inability to read the card. Please contact us for anti - metal interference film. | |||
During Initial Installation | It may cause the button to malfunction or the doorbell to ring continuously, as the system detects environmental changes. Simply power it on again, or press and hold the doorbell button multiple times, or wait for 30 seconds, and the system will automatically recover. | |||
Serial Number | Wiring Definition | Color | Port Definition | Recommended Wiring | Remarks |
1 | 12V | Red wire | Power input | Orange | When short - connecting ON - 5V, DC 5V input is available within the range of DC 6V - 26V. The colors of network cables from different brands may not be the same. |
2 | GND | Black wire | Orange - white | ||
3 | D0 | Green wire | Data output | Green | Wiegand Wiegand signal: D0 or TTL's TX |
4 | D1 | White wire | Green - white | Wiegand Wiegand signal: D1 or TTL's RX | |
5 | LED | Blue wire | Acoustic - optic control | Blue | Low - level effective: When swiping an illegal card, the card reader gives an audible and visual alarm. |
6 | W34 | Gray wire | W34 format | Blue - white | Continuously short - connect with GND to achieve WG34 output. |
7 | BUZ | Purple wire | Acoustic - optic control 2 | Brown - white | High - level effective: For example, connect to the ERR of Hikvision access control controller. |
8 | BELL+ | Yellow wire | Doorbell signal | Brown | BELL+ outputs a high - level signal and can be connected to a high - level doorbell. However, a [relay] is required to control a common doorbell. |
){kind=link}